Horizontal multistage centrifugal pump installation order

Horizontal multi-stage centrifugal pump installation order (1) The unit shipped to the scene, with the base has been installed motor, leveling base can be removed without having to pump and motor.

(2) The base on the ground, near the anchor in the ground pad wedge-shaped horn, the base pad 20 to 40 mm high, ready to level after filling the slurry used.

(3) Check the level of the base with a level meter, flatten the foot nut to fill the base with grout, until the cement should be checked again after the level of dryness.

(4) When the unit power is large, in order to facilitate the transportation, the pump, the motor and the base may be packed separately. In this case, users are required to install and correct the pump unit by themselves. The method is as follows:

a. Remove the dirt on the support surface of the base, the pump foot, and the motor foot, and remove the pump and motor onto the base.

b. Adjust the pump shaft level, tighten the nut properly after leveling to prevent ambulation.

c. Lifting the motor so that the pump coupling and the motor coupling cooperate, put down the motor to do the appropriate position in the end;

d. adjust the gap between the two coupling is about 5mm, and the correction of motor shaft and pump shaft axis coincide, the method is to place the flat ruler on the coupling, the two coupling cylindrical and flat feet phase , If not overlap, should adjust the relative position of the motor or pump, or pad to adjust the sheet;

e. In order to check the accuracy of the installation, the gap between the two coupling planes should be measured with a feeler gauge at several different positions on the circumference of the coupling. The difference between the maximum and minimum clearances on the plane of the coupling must not exceed 0.3 mm. The centerline of the difference between the upper and lower sides or not more than 0.1 mm.

(5) When the unit is not with the base, you need to install directly on the basis of the method similar to 4, but should pay more attention to the correction.

Baler Machine

Our company is a professional manufacturer of kinds baler machine, the baler machines are widely used in various industries of soft fiber material baling and scrap metals baling (such as: cotton fiber, wool, paper, clothing, tires, PET, scrap metal, waste plastic, rice husk, peanut shell, etc.) The baling press machine has a great convenience and considerable economic benefits for the customer material`s storage and transportation. And according to the different needs, we mainly offer horizontal baler and vertical baler for choice.

Characteristics of Baler Machine:

This series of hydraulic systems, of the Hydraulic Baler Machine, using advanced multi - way valve (or distributor), has the function of overflow and and prevent overload system. The overall structure is compact and reasonable, safe and reliable operation, easy operation and maintenance.

Description of Baler Machine:

Hydraulic press force: 10ton to 150ton(can be customized)

Bale size: 800*400*600mm/1200*800*1000mm(Vertical), 25*25*40mm(Horizontal)

Efficiency: 4-8bales/hr(Vertical), 20-25bales/hr(Horizontal)

Driven type: Electric

Voltage: 110V/220V/380V, 50-60Hz(can be customized)

Suitable materials: cotton fiber, wool, paper, clothing, tires, PET, scrap metal, waste plastic, rice husk, peanut shell, etc.

Automatic grade:Semi-Automatic/ Full-automatic

Baler Machine

Baler Machine,Vertical Baler Machine,Hydraulic Baler Machine,Compress Baler Machine

SHANDONG HENGWANG GROUP , https://www.hwmac.com