High-temperature magnetic pump how to install it

High temperature magnetic pump as the name suggests is a pump with corrosion resistance, mainly for the delivery of corrosive liquids. It is a pump that is widely used in general-purpose equipment pumps. At present, corrosive liquid delivery in the domestic market is the most widely used high-temperature magnetic pump made of stainless steel material. Because of its high temperature magnetic pump made of materials, it has the advantages of wide range of corrosion resistance, convenient maintenance and operation.
1, the preparation before installation
1) Check the pump and motor to confirm that there is no damage during transportation and handling
2) Prepare tools and lifting gear and check the basis of the machine according to the drawing
2, the installation order
1) The entire set of pumps arrived at the scene, have been installed motor, leveling base, you can not remove the pump and motor
2) The base on the foundation, ready to fill the leveling concrete.
3) Use the level meter to check the horizontal level of the base with the outlet of the pump. After leveling, secure the anchor bolts and pour the anchor bolts with concrete.
4) Place the ruler on the coupling (up, down, front and back) and check if the pump and motor shaft coincide.
5) After the concrete of the anchor bolt to be fixed is completely dry, tighten the nuts of the anchor bolt, and finally check the level of the entire unit. When slightly uneven, it can be leveled by the wedge iron.
6) Install the suction and outlet lines. When the line is combined with the pump, take care not to add the weight and pressure of the line to the pump to prevent the pump from deforming.
Three screw pump twin screw pump single screw stainless steel single screw pump
7) Clean up the environment and keep it hygienic.
Pump assembly and disassembly
(A) assembly sequence
1, heating the rolling bearings in hot oil until 80 degrees, remove the shaft installed at the shaft.
2, with the shaft Bearing pressure mounted in the suspension.
3, Put the paper pad on the two bearing caps, and fasten the bolts to the suspension. Pay attention to adjust the gap between bearing and bearing cap by paper pad.

We can provide all kinds of Oil Pressure Switch with high quality and reasonable price. The Oil Pressure Switch sends information directly to the vehicle's computer system. Once the data sent indicates low pressure, the computer automatically turns off the engine to avoid damaging vital auto parts. The switch has a very important role in vehicle, so it is only right to keep it in tip-top shape all the time. A damaged switch must be replaced immediately to ensure superior engine performance.

Oil Pressure Switch

Oil Pressure Switch,Lubrication System,Oil Pressure Sensor

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com