FYS-type fluoroplastic anti-corrosive liquid pump precautions

FNS fluoride plastic corrosion-resistant liquid under the pump is a fluoride alloy chemical pump, mainly to solve the problem of transportation of corrosive media. Then in use, should pay attention to what matters? FYS Fluoroplastic anti-corrosive liquid pump Note 1 handling, lifting, the force points must be in the motor frame, the big bottom plate, do not on the liquid pipe Add force to avoid damage. 2. After using for three months, should check the pumps and other parts of the operation is normal, the screws are loose; and add grease in the bearing, wear and tear should promptly replace the parts, so as not to cause greater damage. 3. Pump operation, in the event of failure, should immediately stop overhaul. 4. After the pump is used, if it is not used for a long time, clean it with clean water, maintain it properly and prolong its service life. The above is the use of FYS fluoroplastic corrosion-resistant submerged pump precautions. Extended reading: China Construction Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Industry Exhibition Industry Interconnect (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http: //beng.liuti .cn / (Service Hotline:)

Non Woven Fabric

PP Granules,Non Woven Fabric,Virgin Polypropylene Granules

Water Treatment Chemical Co., Ltd. , http://www.nsadditive.com