Reasons and solutions of insufficient flow of FYS type anticorrosive submerged pump

In daily use, FYS-type corrosion-resistant submerged pumps often encounter the problem of insufficient flow, which is also troublesome, then when the pump when such a failure, we all know the reason Where? And how to solve it? With such questions, followed by Xiaobian to introduce FYS-type corrosion-resistant liquid under the pump flow of the reasons and solutions. FYS-type corrosion-resistant liquid under the pump insufficient flow reasons and solutions A, FYS-type corrosion-resistant liquid under the pump flow inadequate reasons 1. Pump over-flow part of the other pieces of damage; 2. Pump speed is not enough; 3. Pump Suction or output port part of the blockage situation. Second, FYS-type corrosion-resistant liquid under the pump solution is insufficient 1. To replace the pump over-flow part of the other pieces; 2. Check the voltage, the motor is normal; 3. Quickly remove the blockage. The above is the FYS-type corrosion-resistant liquid under the pump the cause of the lack of flow and solutions, I hope we saw these contents, we can eliminate the heart of the pump due to insufficient flow generated troubles. Extended reading: China Construction Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Industry Exhibition Industry Interconnect (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http: //beng.liuti .cn / (Service Hotline:)

V Belts

V Belts,Banded Wedge V Belt,Wrapped Rubber V-Belt

Steel Cord Conveyor Belt Co., Ltd. , http://www.nsconveyorbelt.com