Pneumatic compressed air booster pump works

Pneumatic compressed air booster pump is a type of compressed air booster pump, which uses a large diameter gas-driven piston with a small diameter piston connected to the structure, then it works What is the following is about the working principle of pneumatic compressed air booster pump introduced. Pneumatic compressed air booster pump works Pneumatic compressed air booster pump is the use of two piston area ratio to produce pressure ratio, pressure ratio can be calculated by the maximum output pressure. Work, the driving piston to the high-pressure plunger end of the reverse movement, the entrance of the one-way valve open, one-way outlet valve closed, the media inhaled pump. When the piston moves backward, a certain pressure will be formed on one side of the medium, and the pressure will close the inlet check valve and the check valve at the outlet will open to output the high-pressure medium. The booster pump operates continuously through a two-position, four-way pilot valve and a two-position, two-way pilot valve. Two two-way pilot valve control spool. The pilot valve is controlled by an air-driven piston that continuously fills and drains the air-controlled spool chamber so that the driving gas alternately acts on the bottom and top surfaces of the piston to allow continuous pump operation. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)

Rubber Extrusion

Rubber Seal Strip,Seal Strip,Rubber Seal

Neway Rubber Products Co., Ltd. , http://www.lxrubbers.com