2. The movement of the welding fortune very important:
Example: thickness 5mm, without groove butt welding stand. This welding method using smaller diameter electrodes, to use the 3.2mm, current 80-100A (10-15% smaller than the flat welding), so that the pool is small, fast condensation can avoid condensation of liquid metal drip; with short welding arc, arc length is usually no more than wire diameter, and welding and welding pieces constitute 60º-80º angle, so relying on Arc blowing force generating upward thrust on boosting the bath of molten iron, applied electrodes to condense transition metal bath;
Electrode for Vy motion (ie arc welding in the groove on one side, to be transported to the other side and then condensation), the transport bar mode can be "double zigzag", "successive sawtooth" etc., swing upward, until the completion of the entire road seam welding.
3. Note:
1) should be harmony between Vx, Vy, Vz three sports divisions, and down to avoid the uneven weld penetration.
2) on both sides of the condensation width should differences, to avoid incomplete penetration, insisted uniform weld penetration.
3) Repeat ending interrupter method.
4) When the molten iron to make immediately before putting the Vx campaign, can not stay or slows down.
Our company was established in 2004. We have professional team which offers the best service for our customers, and we also have advanced testing equipments to ensure the quality of the products. Our principal products include Brazing Alloy (Rod, wire, and Ring), Co2 gas shield Welding Wire , Flux-cored arc welding wire, Electrode, Stainless Steel Welding Wire, Tin Solder , Tin Silver Solder, Lead Free Solder Wire, Lead Free Solder Bar, Resin Core Solder Wire, Lead Solder Wire , Lead Solder Bar , Tin Solder Wire .

Tin Solder
Tin Solder, Tin Silver Solder, Lead Free Solder Wire, Lead Free Solder Bar, Tin Solder Wire, Lead Solder Wire, Lead Solder Bar
JIAYUAN WELDING CO., LIMITED , http://www.welding-suppliers.com
没有评论:
发表评论