FZB (L) small corrosion-resistant self-priming pump installation considerations

FZB (L) small corrosion-resistant self-priming pump is a steel-lined fluorine plastic structure of the small self-priming pump, has excellent corrosion resistance and self-priming performance. So in its installation, should pay attention to what matters? The following is the FZB (L) small corrosion-resistant self-priming pump installation Notes introduction. FZB (L) small corrosion-resistant self-priming pump installation Notes 1. The pump arrived at the production site by long-distance transport, the installation must be checked before the complete machine parts are intact, fasteners should be fastened, check the pump shaft and the motor shaft Concentricity, if any, should be corrected. 2. Installation to minimize suction pipe hydraulic losses shall not be installed less than 90 ° elbows, inlet pipe 90 ° bend not more than 2, the pump inlet should be set to prevent large impurities into the pump , To ensure that the pump can be normal operation. 3. The inlet pipe connection bolts should be tightened, tight seal can not leak, otherwise it will seriously affect the self-priming pump performance. Extended reading: China Construction Water Exhibition water pump manufacturers rankings ptc exhibition motor top ten brands pump valve pipe fittings Show Information Industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // mj .liuti.cn / (Service Hotline:)

We have 2 types of Large Diameter Hose: Frac Hose and Layflat Hose.

Frac hoses were produced through-the-weave, easy cleaning and no drying required.

Designed for long service life. Tough and durable with exceptional resistance to abrasion

And cutting for use on wide variety of environment conditions.

Protected against mechanical damages.

Very low elongation (compared with vulcanized process) under pressure, prevents hose from [snaking".

High resistance to heat, fuels, chemicals, UV, ozone, weathering,hydrolysis,and microbiological attack.

Tube & cover: thermoplastic, polyurethane (TPU)

Reinforcement: High tenacity polyester filament, circular weaving.

The special extrusion through-the-weave process gives a very strong bonding between cover and lining as well as firmly encapsulation the woven polyester.

Temperature range from -50℃ to +70℃.

We can supply frac hoses with size: 8``,10``,12`` and 16``.

Large Diameter Hose

Large Diameter Hose,25Mm Reel Hose,32Mm Reel Hose,Large Diameter Rubber Hose

NANTONG SENTIAN FIRE-FIGHTING EQUIPMENT CO.,LTD. , http://www.firehosefactory.com