Air filter pressure reducing valve model features

Pressure Reducing Valve Model Air filter pressure reducing valve is a kind of auxiliary device of pneumatic diaphragm regulating valve combination unit. After input compressed air of 0.3 ~ 1.0MPa, it can provide 0.1 ~ -1.0MPa clean air source to pneumatic remote control board and valve positioner . Pressure reducing valve air filter pressure reducing valve belongs to the pilot piston valve. The main valve and pilot valve composed of two parts. The main valve from the valve seat, the main valve disk, piston, spring and other components. Pilot valve mainly by the valve seat, disc, diaphragm, spring, adjusting spring and other components. By adjusting the spring pressure to set the outlet pressure, the use of diaphragm sensing outlet pressure changes, through the pilot valve opening and closing drive piston to adjust the size of the main valve throttle flow area, to achieve decompression regulator function. This product is mainly used for gas pipeline, such as air, nitrogen, oxygen, hydrogen, liquefied gas, natural gas and other gases. Air filter pressure reducing valve Model Features: 1, sophisticated technology, compact structure, beautiful appearance. 2, filter pure, with PE porous filter, can be used repeatedly. 3, with dual function of air filtration decompression, pressure output is stable. 4, the key components of stainless steel material. 5, sewage water is convenient and effective. 6, aluminum alloy castings for anodized, spray the surface, strong and beautiful corrosion-resistant. 7, with the factory production of electrical converters, electrical valve positioner to achieve the integration of the factory, make installation more convenient, the structure more sophisticated and beautiful. Air filter pressure reducing valve Model Specifications: Nominal pressure (Mpa) 1.6 2.5 4.0 6.4 10.0 16.0 Shell test pressure (Mpa) 2.4 3.75 6.0 9.6 15.0 24 Sealing test pressure (Mpa) 1.6 2.5 4.0 6.4 10.0 16.0 The maximum inlet pressure (Mpa) ) 1.6 2.5 4.0 6.4 10.0 16.0 Outlet pressure range (Mpa) 0.1-1.0 0.1-1.6 0.1-2.5 0.5-3.5 0.5-3.5 0.5-4.5 Pressure characteristic deviation (Mpa) △ P2P GB12246-1989 Flow characteristic deviation (Mpa) P2G GB12246 -1989 Minimum pressure drop (Mpa) 0.15 0.15 0.2 0.4 0.8 1.0 Leakage X / F (polytetrafluoroethylene / rubber): OY (hard seal): GB12245-1989 Shell test does not include the diaphragm, the top cover air Filter pressure reducing valve Model Overall dimensions: Nominal diameter DN Dimensions LH Hl 1.6 / 2.5MPa 4.0MPa 290 90 300 98 300 110 300 110 320 125 320 125 325 130 465

Heat Treated Steel Bar And Tube

Heat treated steel bar is produced by heating and cooling in different temperature based on the steel grades to improve the steel bar mechanical properties or machinability for various industrial applications. Heat treated steel bar includes annealed steel bars, Normalized Steel Bar, quenched and temper qt steel bar.

Annealed Steel Bar has better ductility and lower hardness, which can be easier to be machined. The annealing processing is usually widely used for steel grade with higher carbon content above 0.5%. However, some low carbon steel also requires to do annealing for special usage such as 20CrMnTi gear steel. For some special material such as 20CrMnTi gear steel and GCr15 such bearing steel, spheroidizing annealing is often required.

Normalized steel bar sometime is also one kind of annealing processing. It mainly changes the grain to remove the impurities in steel and improves the strength and hardness. For some hot rolled steel bars, to keep the basic mechanical properties, normalizing is often used.

Quenching and Tempering, abbreviated as Q&T is a king of processing that strengthen or harden steel bars by heating the materials and then cooling in water, oil or other liquid medium, that rapidly the change from austenite to perlite to get the proper properties for various usage. The quenched & tempered steel bar materials are usually with carbon from 0.30% - 0.60%, it is widely used as merchant bars in components of various machines.

Our advantages on producing heat treated steel bars:

1) Big stocks of hot rolled round bars or wire rods as raw materials

2) Wide range of Cold Drawn Steel Bar sizes: from 10mm to 150mm

3) Different cold drawing medias powder or oil to get different surface

4) Straightening machines to get better straightness up to 0.5mm/m

5) Grinding and polishing machines to get better roughness upto 0.4um

6) Heat treating furnaces to adjust the mechanical properties

7) Full sets of testing equipment to test the sizes, mechanical properties and microstructure.

8) Multiple packages to avoid broken packages and anti-rusty

Heat Treated Steel Bar And Tube

Astm A193,Round Steel Tubing,Heat Treated Steel Tube,Heat Treated Steel Bar And Tube

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.lerenspecialsteel.com