Stainless steel corrosion-resistant pump base installation method

Base installation is a stainless steel corrosion-resistant pump installation is an important step in the installation of good or bad, affecting the quality of the pump after use, then we all know how to install the pump pump seat? If you do not know, The following is an introduction to the installation method of stainless steel corrosion-resistant pump base. Installation of stainless steel corrosion-resistant pump base 1. Place the base with the pump and the motor on the foundation, insert the anchor bolt into the anchor bolt hole of the base, rotate the man washer and nut, use different thickness and different forms of steel Pad to adjust the pump to a horizontal position. 2. Clear the anchor bolts reserved hole water and debris, perfusion with concrete anchor bolts. 3. After the concrete is solidified, tighten the anchor bolts and nuts. Re-check the level of the pump, such as pump position changes must be corrected again. 4. After the secondary grouting with concrete, the concrete should fill the entire space under the base, that is to be poured into contact with the roof, the sump and all the stiffeners. Welded base to perfusion to the base surface of the base of the channel. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)

WPC Park Bench

WPC Park Bench, WPC Bench, WPC Bench Composite

Shangyu YongSheng New Material Co., Ltd. , http://www.wpc-deckingboard.com