Energy saving tips for water pumps

Energy saving tips for water pumps

1, try to shorten the pipeline.

2, no "anti-aircraft" style outlet. Because of this outlet to increase energy consumption. At the same time to make the pump outlet is facing the pool.

3, try to increase the outlet pipe diameter.

4, promptly clear the pipe blockage. Foreign matter left in the inlet pipe, impeller or diversion channel, will reduce the amount of water.

5, try to use the direct drive coupling, it is because the direct drive coupling than the belt transmission efficiency.

6, under the premise of ensuring clean water, remove the filter.

7, to the pump seal parts carefully check to prevent the pump air intake. If the pump into the air, the amount of water will be significantly reduced.

8, can use the motor do not have a diesel engine or gasoline engine, conditional three-phase asynchronous motor without single-phase asynchronous motor.

Z208 Cast Iron Welding Electrodes

DESCRIPTION:

Z308 Cast Iron Welding Electrodes is a graphitic type coating cost iron electrode with carbon steel core.
Both AC and DC can be applied in welding. Weld seam metal has excellent crack resistibility. And its price is cheaper.

Application:

It is used for repairing welding defects of gray cast iron.

Attention:

A.Welding Electrodes must be baked for 1 hour at the temperature of 150℃ before welding.
B.For cast iron parts bearing impact stress, it is not good to use it.
C.For welding detects of small and thin cast iron parts fabricated by low steel, welding electrodes needn`t be preheated; for general welding pieces, welding electrodes should be preheated to around 400℃, cool it after welding and the welding zone may be processed by cutting.

Z208 Welding Electrodes

Z208 Welding Electrodes,Electrode Welding Rod,Z208 Cast Iron Welding Electrodes,Welding Electrode Z208

Dingzhou Jinlong Metal Production Co., Ltd. , https://www.weldingelectrodefactory.com